The THB5 equipment series is designed to fill, recover and recycle the fire extinguishing Clean Agents (both in liquid and gas phases) from system cylinders into other cylinders or disposable tank.
Recovery efficiency: 99%. Max pressure: 42 bar. Gases: FE36 , Halotron , FM200 , Novec1230 , HFC227ea , HFC125 .The THB5 equipment series is designed to fill, recover and recycle the fire extinguishing Clean Agents (both in liquid and gas phases) from system cylinders into other cylinders or disposable tank. Depending from the model/version, it is possible to recover the mixture Agent + Nitrogen from pressurized cylinders into cylinders of the same capacity, also at the same final filling pressure of 25 or 42 bar. In this way, even if pressurized with nitrogen, it is possible to recover the product when it has to be employed again, without separating the nitrogen. For example, it may happen in case of cylinders periodical inspection or when dealing with a cylinder with uncertain product. In other cases, it is possible to empty the cylinders by transferring the product into another cylinder of same capacity in order to have the first cylinder available for a substitute product.The unit is also able to fill the cylinders or the fire extinguishers with a new fire extinguishing Clean Agent, starting from a large tank container and then pressurizing them by Nitrogen at the required final pressure. On request, it is also possible to recycle the fire extinguishing Clean Agent in order to remove impurity before using it again.
Download:
The THB523 equipment series is designed to fill, recover and recycle the fire extinguishing Clean Agents (both in liquid and gas phases) from system cylinders into other cylinders or disposable tank on maximum 70 bar pressure.
Depending from the version, the THB units are designed to fill, recover and recycle fire extinguishing Clean Agents, both in the liquid and in the gas phase, from system cylinders into other cylinders or tanks.
N7/15 is equipped with a 3 piston electrically driven test pump able to perform hydraulic test up to 500 bar depending on the version
A THB/G1HP modellcsaládot tűzoltókészülékek és más tartályok oltógázzal (clean agent) történő töltésére, a gáz visszanyerésére vagy újrafelhasználására fejlesztettük ki. Max visszanyerés: 99%.A Maximális nyomás: 42 bar. Gázok: FE36, Halotron, FM200, Novec1230, HFC227ea, HFC125.