Single-tier, stackable LPG rack for 35 cylinders (5 × 7), suitable for a mix of domestic 11.5 kg steel and aluminium PB cylinders (up to Ø 300 mm, up to 725 mm in height); approx. 2200 × 1680 × 930 mm.
A gate that opens inwards at the front and rear, with a central pivot, a rubber guide rail and top lift from the gate end. Our own design, made to order — ask for a quote!
Durable structural design and standard solutions for safe operation.
Tailored to individual technical requirements, gas types and operating conditions.
A KLPGA35-300×725 LPG tank It holds 35 bottles in a single unit that can be moved by a forklift and stacked on top of one another: the bottles are arranged upright in 5 rows, with 7 bottles in each row. It has been designed for the domestic market’s mixed stock of steel and aluminium PB cylinders, including the 725 mm high aluminium cylinders, which is why it is 930 mm high: a 100 mm clearance is left above the cylinders for the forklift’s forks, which extend from the end of the gate under the two upper lifting beams; it can be transported in two layers in a tarpaulin-covered trailer and in three layers in a mega trailer. The gate is formed at the front and rear by a half-frame pivoting at the centre, which opens inwards and upwards; the row of bottles is guided by rubber side rails, whilst the protruding upper crossbars rest on the base grid of the cradle above. We designed the crates ourselves and manufacture them to order.
| Type, part number | KLPGA35-300×725 |
|---|---|
| Number of bottles, arrangement | 35 bottles on one level: 5 rows × 7 |
| Type code | KLPGA35-300×725: K = cage, LPG, A = can be loaded and unloaded automatically in rows, 35 cylinders, for cylinders measuring Ø 300 × 725 mm |
| Bottle | Ø ≤ 300 mm, total height ≤ 725 mm (e.g. an 11.5 kg steel or aluminium PB cylinder) |
| External dimensions (for information only) | 2200 × 1680 × 930 mm (the top crossbar protrudes a further 45 mm) |
| Stacking | the two upper crossbars protrude by 45 mm and fit into the recesses in the base of the upper clamp — self-centring, with no protruding parts |
| Lifting | top: the fork, from the gate end, under the two lifting beams (with a fork extension); a 100 mm gap above the bottles |
| Delivery | tarpaulin-covered trailer (≈ 2.65 m internal height): in 2 layers, 8 crates per row over 13.6 m |
| Gate | a pivoting half-frame at the front and back, in the centre — opens inwards and upwards, manually or mechanically |
| Side wall | W-shaped lattice hollow-section frame, with a rubber guide rail at half the height of the bottles |
| Floor | plank flooring in the direction of travel |
| Surface | hot-dip galvanising (EN ISO 1461) |
| Manufacturing | in-house design, made to order |

LPG cylinders — ranging from domestic propane cylinders to forklift gas cylinders — are smaller and lighter than industrial high-pressure cylinders, so their transport does not require a pallet designed for 50-litre cylinders, but rather one that holds many small cylinders in an orderly manner and fits the filling plant’s production line. PWENT’s LPG crates are designed for this purpose: single-tier, stackable frames in which the cylinders stand upright in rows. The row of cylinders can be pushed in and out lengthways — the slatted floor runs in the direction of travel, whilst rubber guide rails on both long sides hold and guide the cylinders.
The gate consists of a half-frame at the front and another at the back, with the pivot point situated in the centre of the cage. When closed, it holds the row at half the height of the bottles; to open it, the tab protruding from the end of the cage must be lifted, at which point the gate swings inwards and upwards — it does not extend beyond the cage, so it can also be opened by the production line’s lift mechanism. No separate component is required for stacking: the two upper crossbars protrude 45 mm from the frame and fit into the funnel-shaped pockets in the base grid of the cage above, so that when the upper cage is lowered, it slides into place by itself, remains stationary within the stack, and there are no protruding parts. When lifting, the forklift’s forks extend from the end nearest the gate under the two upper lifting beams — leaving a 100 mm gap above the bottles — so the pallet does not require legs. The pallet is sized to suit the bottle type: the standard dimensions are 2200 × 1680 mm, whilst the height and bottle arrangement depend on the bottle’s diameter and height. The crates are made to order; the images are stylised illustrations and the dimensions are for guidance only.
The LPG crates are designed for PB and propane-butane cylinders. They are used at filling stations, in the warehouses of bottled gas distributors and during delivery: the rack secures the cylinders into a single unit that can be moved by a forklift and stacked on top of one another, making loading quicker, preventing the cylinders from knocking against each other, and keeping the storage area tidy. Who we recommend them to:
For information on bottle sizes, see our knowledge base: gas cylinder sizes.
Please specify the type of bottles you would be transporting (kg, material, diameter, total height), how many pallets you require, whether loading is done manually or by a filling line, and how they will be transported (tarpaulin-covered trailer, container). If you do not know any of these details, please write „I don’t know”, and our technical team will help you with the sizing.
Bespoke labelling and engraving, stamping machine design and manufacture. Whether you have a special bottle size or a special product, we can meet your needs.
Gas cylinder bundles for use on board ships, on offshore platforms and in ports, based on the second-generation PW23 bundle range: hot-dip galvanised steel frame, stainless steel manifold, 4–24 × 50 l.
Customised design: we tailor the mounting, surface protection and certification (DNV 2.7-1 if required) to the specific application — please ask for a quote.
We always use the cookies necessary for the website to function. We only load statistical tracking tools (Google Analytics, Jetpack) and external content (such as Google Maps) with your consent. You can change your settings at any time by clicking the „Cookie settings” button.