For the transport and storage of 16 × 50-litre gas cylinders with a diameter of 229 mm: 1040 × 1050 × 970 mm (with low rear wall), internal dimensions 950 × 960 mm. Hot-dip galvanised, robot-welded steel frame, four lifting eyes, electrical access hatch, folding ramp, grating base.
PWENT metal crates, manufactured in-house – stack neatly when empty. Ask for a quote!
Durable structural design and standard solutions for safe operation.
Tailored to individual technical requirements, gas types and operating conditions.
A KN16x229 metal cage for transporting gas cylinders It holds 16 gas cylinders, each with a capacity of 50 litres and a diameter of 229 mm, in a single unit that can be moved using either a crane or a forklift truck. It is part of PWENT’s proprietary KN cage range: a robot-welded, hot-dip galvanised steel frame, four lifting eyes, a fold-down ramp and a grating base. It carries sixteen cylinders on an almost square base measuring 1040 × 1050 mm: the most common choice in gas plants and filling stations, where the aim is to move as many cylinders as possible with a single forklift manoeuvre. When empty, the racks can be conveniently stacked on top of one another, so they take up very little space when stored or returned.
| Type, part number | KN16x229 (low back panel: KN16x229L0_A) |
|---|---|
| Bottles | 16 × 50 l, Ø 229 mm |
| Overall dimensions (w × l × h) | 1040 × 1050 × 970 mm |
| Frame | hollow section, robot-welded, hot-dip galvanised (EN ISO 1461) |
| Layout | 4 × 4 |
| Width with lifting eye | 1,050 mm |
| Internal dimensions (floor area) | 950 × 960 mm |
| Height | 970 mm (with low back panel) |
| With a high back panel (KN16x50H0_A) | height 850 / 1120 mm, floor area the same |
| Bottom frame | 100 mm, with an electrical connection |
| Lifting | 4 lifting eyes, for crane lifting |
| Platform, ramp | galvanised walkway grating; fold-down ramp (non-slip, 6 mm lens-patterned sheet metal) |
| Stacking | can be stacked empty |

The KN crate is PWENT’s own-design metal crate for transporting gas cylinders. The frame is made from hollow sections, robot-welded and then hot-dip galvanised, ensuring that the cage can withstand on-site storage, lorry transport and frequent loading and unloading over a long period. The lower frame is 100 mm high: thanks to the forklift slots, the cage can be picked up from two directions using a forklift truck, whilst the four lifting eyes allow it to be suspended from a crane. The base consists of a galvanised grating, on which the cylinders stand; water and dirt drain through it.
There is a fold-down ramp at the front, made of non-slip, lens-patterned, strong 6 mm steel plate: when folded down, bottles can be rolled in and out easily; when folded up, the front of the crate is closed. The rear wall can be either low or high; the height and internal dimensions are specified in the data sheet for each model. The bottles are secured with straps for transport, whilst the corners and lifting eyes are designed so that empty crates can be conveniently stacked on top of one another. If your application requires a different bottle size, a different base area or a bespoke accessory, we will design and manufacture a bespoke crate based on the KN models.

KN crates are designed for 50-litre industrial gas cylinders with a diameter of 229 mm (the KN12x267 model is for larger cylinders with a diameter of 267 mm). They are used in gas works, filling plants and by distributors for the collection, storage and transport of cylinders: the cage secures the cylinders into a single unit that can be moved by a crane or forklift, making loading quicker and safer. Who we recommend it for:
Technical background on pressure equipment: gas safety standards and regulations.
Please specify the type of bottles (volume, diameter) and the number you would be transporting or storing in a crate, whether you require one with a low or high back, whether you need a ramp and straps, and how many crates you require. If you do not know any of these details, please write „I don’t know”, and our technical team will help you choose.
Bespoke labelling and engraving, stamping machine design and manufacture. Whether you have a special bottle size or a special product, we can meet your needs.
Gas cylinder bundles for use on board ships, on offshore platforms and in ports, based on the second-generation PW23 bundle range: hot-dip galvanised steel frame, stainless steel manifold, 4–24 × 50 l.
Customised design: we tailor the mounting, surface protection and certification (DNV 2.7-1 if required) to the specific application — please ask for a quote.
We always use the cookies necessary for the website to function. We only load statistical tracking tools (Google Analytics, Jetpack) and external content (such as Google Maps) with your consent. You can change your settings at any time by clicking the „Cookie settings” button.