Gas cylinder transport pallet 48 pcs

Our areas of expertise

Gas cylinder transport pallet 48 pcs

A single-tier, stackable LPG rack for 48 cylinders (6 × 8), designed for standard 11.5 kg aluminium propane cylinders (Ø 250 mm, total height 725 mm); approx. 2200 × 1680 × 930 mm.

A gate that opens inwards at the front and rear, with a central pivot, a rubber guide rail and top lift from the gate end. Our own design, made to order — ask for a quote!

SKU KLPGA48-250x725 Category Tags , ,

Industrial reliability

Durable structural design and standard solutions for safe operation.

Customisable design

Tailored to individual technical requirements, gas types and operating conditions.

Description

Learn more about the product

A KLPGA48-250×725 LPG cage It holds 48 cylinders in a single unit that can be moved by a forklift and stacked on top of one another: the cylinders are arranged upright in 6 rows, with 8 cylinders in each row. It is designed for the standard 11.5 kg aluminium PB cylinders used in Hungary, which is why it is 930 mm high: there is a 100 mm clearance above the cylinders for the forklift’s forks, which extend from the gate end beneath the two upper lifting beams; it can be transported in two layers in a tarpaulin-covered trailer and in three layers in a mega trailer. The gate is formed at the front and rear by a half-frame pivoting at the centre, which opens inwards and upwards; the row of cylinders is guided by rubber side rails, whilst the protruding upper crossbars rest on the base grid of the cage above. We designed the crates ourselves and manufacture them to order.

Single-storey, stackableThe bottles stand upright on a single level; the two upper crossbars protrude by 45 mm and fit into the recesses in the base of the crate above them — the stack does not slide forwards, backwards or sideways.
Inward-opening gates at the front and rearThe gate consists of a half-frame that pivots in the centre: it opens upwards, within the hopper, and does not protrude — it can be opened either manually or by the machinery on the filling line.
Rubber guide railOn both longitudinal sides, at half the height of the bottles, a rubber-coated rail guides the row of bottles; the bottles slide along the rubber, not along the frame.
Can be pushed in a lineThe slatted floor runs in the direction of pushing, so a whole row of bottles can be pushed in and out in one go — either by hand or using a palletiser.
Upper liftThe forks of the forklift, starting from the gate end, extend beneath the two upper lifting beams with the aid of a fork extension; the pallet does not require legs, as it rests on its base both in the row and in the stack.
Galvanised steel frameClosed-section frame with W-grid side walls, welded construction, hot-dip galvanised — for outdoor storage and frequent loading.

Technical specifications of the KLPGA48-250×725 LPG clamp

Type, part number KLPGA48-250×725
Number of bottles, arrangement 48 bottles on one level: 6 rows × 8
Type code KLPGA48-250×725: K = cage, LPG, A = can be loaded and unloaded automatically in rows, 48 cylinders, for cylinders measuring Ø 250 × 725 mm
Bottle Ø ≤ 255 mm, total height ≤ 725 mm (e.g. an 11.5 kg aluminium PB cylinder)
External dimensions (for information only) 2200 × 1680 × 930 mm (the top crossbar protrudes a further 45 mm)
Stacking the two upper crossbars protrude by 45 mm and fit into the recesses in the base of the upper clamp — self-centring, with no protruding parts
Lifting top: the fork, from the gate end, under the two lifting beams (with a fork extension); a 100 mm gap above the bottles
Delivery tarpaulin-covered trailer (≈ 2.65 m internal height): in 2 layers, 8 crates per row over 13.6 m
Gate a pivoting half-frame at the front and back, in the centre — opens inwards and upwards, manually or mechanically
Side wall W-shaped lattice hollow-section frame, with a rubber guide rail at half the height of the bottles
Floor plank flooring in the direction of travel
Surface hot-dip galvanising (EN ISO 1461)
Manufacturing in-house design, made to order
Dimensional sketch of the KLPGA48-250x725 LPG container: top, side and end views, 2200 × 1680 × 930 mm
Dimensions of the KLPGA48-250×725 information panel

Construction and materials

LPG cylinders — ranging from domestic propane cylinders to forklift gas cylinders — are smaller and lighter than industrial high-pressure cylinders, so their transport does not require a pallet designed for 50-litre cylinders, but rather one that holds many small cylinders in an orderly manner and fits the filling plant’s production line. PWENT’s LPG crates are designed for this purpose: single-tier, stackable frames in which the cylinders stand upright in rows. The row of cylinders can be pushed in and out lengthways — the slatted floor runs in the direction of travel, whilst rubber guide rails on both long sides hold and guide the cylinders.

The gate consists of a half-frame at the front and another at the back, with the pivot point situated in the centre of the cage. When closed, it holds the row at half the height of the bottles; to open it, the tab protruding from the end of the cage must be lifted, at which point the gate swings inwards and upwards — it does not extend beyond the cage, so it can also be opened by the production line’s lift mechanism. No separate component is required for stacking: the two upper crossbars protrude 45 mm from the frame and fit into the funnel-shaped pockets in the base grid of the cage above, so that when the upper cage is lowered, it slides into place by itself, remains stationary within the stack, and there are no protruding parts. When lifting, the forklift’s forks extend from the end nearest the gate under the two upper lifting beams — leaving a 100 mm gap above the bottles — so the pallet does not require legs. The pallet is sized to suit the bottle type: the standard dimensions are 2200 × 1680 mm, whilst the height and bottle arrangement depend on the bottle’s diameter and height. The crates are made to order; the images are stylised illustrations and the dimensions are for guidance only.

Bottles and their uses

The LPG crates are designed for PB and propane-butane cylinders. They are used at filling stations, in the warehouses of bottled gas distributors and during delivery: the rack secures the cylinders into a single unit that can be moved by a forklift and stacked on top of one another, making loading quicker, preventing the cylinders from knocking against each other, and keeping the storage area tidy. Who we recommend them to:

  • PB and LPG filling stations
  • Bottled gas distributors and resellers
  • Logistics and delivery
  • On-site bottle storage

Standards and licences

  • Delivery: for the carriage by road of LPG cylinders (UN 1965), the European Agreement concerning the International Carriage of Dangerous Goods by Road the relevant regulations apply; the rack holds the bottles upright, supported in rows and secured by a gate.
  • Surface protection: Hot-dip galvanising in accordance with EN ISO 1461; protective coating on surfaces in contact with the cylinder, where required.
  • Stacking and lifting: We design the rack to accommodate full bottles stacked on top of one another; the two upper lifting beams are also designed to withstand the jolts caused by forklift handling.

For information on bottle sizes, see our knowledge base: gas cylinder sizes.

Available options

Bottle typeA layout and mould height adapted to the diameter and height of the bottle.
Gate openingManual opening, or a lifting lug fitted to the filling line’s lifting device.
Protective coverRubber or plastic coating on the surfaces in contact with the bottle.
Apply atCompany logo, inscription and serial number on the frame.
SurfaceHot-dip galvanising; powder coating on request.

Request a quote for the KLPGA48-250×725 LPG mould

Please specify the type of bottles you would be transporting (kg, material, diameter, total height), how many pallets you require, whether loading is done manually or by a filling line, and how they will be transported (tarpaulin-covered trailer, container). If you do not know any of these details, please write „I don’t know”, and our technical team will help you with the sizing.

I would like to request a quote →

Related pages

Related products

A reliable choice

3D design of an automatic gas cylinder handling system
Based on a custom quote

Bespoke labelling and engraving, stamping machine design and manufacture. Whether you have a special bottle size or a special product, we can meet your needs.

Offshore gas cylinder bundle: PWENT’s second-generation PW23x16 bundle for use offshore — offshore and onshore versions available on request
Based on a custom quote

Gas cylinder bundles for use on board ships, on offshore platforms and in ports, based on the second-generation PW23 bundle range: hot-dip galvanised steel frame, stainless steel manifold, 4–24 × 50 l.

Customised design: we tailor the mounting, surface protection and certification (DNV 2.7-1 if required) to the specific application — please ask for a quote.