20 SCBA breathing apparatus cylinders in a single crate, arranged in a 5 × 4 grid, standing upright: each cylinder in a separate, glued polystyrene foam cell. Base dimensions 100 × 80 cm, height including pallet 60 cm, suitable for cylinders up to Ø 178 mm.
Galvanised steel, rubber edge protection, fold-down handles, pallet base — ADR-compliant. Designed and manufactured in-house – ask for a quote!
Durable structural design and standard solutions for safe operation.
Tailored to individual technical requirements, gas types and operating conditions.
A BOX-FB20 bottle carrier crate Designed for the on-site storage of fire service breathing apparatus cylinders and their rapid, safe movement in an emergency: it holds 20 SCBA cylinders, arranged in a 5 × 4 grid, each in its own padded compartment. The tried-and-tested, factory-manufactured version: twenty cylinders neatly arranged, movable in a single action — the spare cylinders for an entire response unit in a single crate. The crate is made of galvanised steel; it can be moved manually using the fold-down handles or mechanically using the palletised base, and the upright, secured, impact-protected positioning of the cylinders is also suitable for road transport.
| Type, part number | BOX-FB20 |
|---|---|
| Number of bottles, arrangement | 20 bottles, arranged in a 5 × 4 grid, standing upright |
| Size (sole) | 100 × 80 cm |
| Overall height | 60 cm (including the pallet) |
| Maximum bottle diameter | Ø 178 mm |
| Load capacity | 500 kg (when moved manually) |
| Bottles | 6.9 l composite (with protective base) and 6.0 l steel SCBA cylinders |
| Floor / side wall | ≥ 2 mm / ≥ 1.5 mm galvanised steel |
| Handles | 4–6 fold-down |
| Internal security | glued polyfoam cells, rubber edge protection |
| Design | a tried-and-tested, mass-produced model — in service with a European public fire service |
Fire brigades’ breathing apparatus cylinders must be managed in two situations: they must be stored properly in the fire station, with many cylinders in a limited space, and, when an alarm is raised, they must be transported quickly and safely to the scene — all in accordance with regulations. The PWENT cylinder transport case solves this in a single device: the cylinders stand upright, each in its own individual compartment with bonded polyfoam padding, so they do not knock against one another, and the case remains transparent: you can see at a glance how many bottles are inside.
The crate is made of galvanised steel, with reinforced corners and edges; the base is at least 2 mm thick and the side walls are at least 1.5 mm thick. A rubber edge guard around the rim protects the bottles from scratches and the handler from hand injuries. It stands on non-slip feet on a pallet base: it can be picked up in a single movement with a forklift, and can also be moved by hand using the fold-down handles. The cell dimensions are designed to accommodate composite and steel SCBA cylinders, up to a maximum diameter of 178 mm. The total height, including the pallet, is 60 cm, meaning the crate takes up very little space in both the storeroom and the vehicle.
We customise the crate to suit its intended use: on request, it can be fitted with reflective markings and the organisation’s logo so that it remains clearly visible at night and in smoke, whilst the size of the cells is tailored to the type of bottle used. The polyfoam cells are replaceable, whilst the galvanised steel frame is designed to withstand frequent loading, washing and outdoor storage for many years.

The case is designed for composite and steel SCBA breathing apparatus cylinders — for example, 6.9-litre composite cylinders (with protective base) and 6.0-litre steel cylinders — with a maximum diameter of Ø 178 mm. For other cylinder sizes, the dimensions of the compartments can be adjusted as required. Who we recommend it for:
We also offer solutions for the maintenance and inspection of bottles: gas cylinder maintenance machines.
Please specify the type of breathing apparatus cylinders (composite or steel, volume, diameter) and the number you would like to have delivered in each crate, whether reflective markings or labelling are required, and how many crates you need. If you do not know any of these details, please write „I don’t know”, and our technical team will help you choose.
Bespoke labelling and engraving, stamping machine design and manufacture. Whether you have a special bottle size or a special product, we can meet your needs.
Gas cylinder bundles for use on board ships, on offshore platforms and in ports, based on the second-generation PW23 bundle range: hot-dip galvanised steel frame, stainless steel manifold, 4–24 × 50 l.
Customised design: we tailor the mounting, surface protection and certification (DNV 2.7-1 if required) to the specific application — please ask for a quote.
We always use the cookies necessary for the website to function. We only load statistical tracking tools (Google Analytics, Jetpack) and external content (such as Google Maps) with your consent. You can change your settings at any time by clicking the „Cookie settings” button.