PW25 horizontal gas cylinder bundle, 4–24 × 50 l

Our areas of expertise

PW25 horizontal gas cylinder bundle, 4–24 × 50 l

Horizontal gas cylinder bundle comprising 4, 6, 8, 9, 10, 12, 15, 16, 20 or 24 50-litre cylinders, for a maximum working pressure of 400 bar. Length 1805 mm, width 510–1445 mm, height 672–1374 mm.

TPED (2010/35/EU) type-approval and ADR/RID, and PED (2014/68/EU) EU type-examination; design: EN ISO 10961:2019.

SKU PW25 Category

Industrial reliability

Durable structural design and standard solutions for safe operation.

Customisable design

Tailored to individual technical requirements, gas types and operating conditions.

Description

Learn more about the product

A PW25 horizontal gas cylinder bundle (bündel) The horizontal version of the second-generation PW23 range: it holds 4–24 50-litre cylinders in a single unit that can be moved using a forklift or a crane, with a maximum operating pressure of 400 bar. The cylinders lie horizontally, so the bundle is low-profile and can fit where a vertical bundle cannot. In principle, any member of the PW23 family can be ordered in a horizontal configuration; the table below lists the certified versions.

Horizontal layout, low-rise constructionThe bottles lie horizontally: the stack is 672–1,374 mm high, and the length is 1,805 mm for all versions.
Welded, galvanised steel frameMade from hot-rolled steel sections, with a galvanised finish, designed for routine lifting.
Gentle bottle clampingThe bottles are held in place by a clamping plate and rubber inserts, thus minimising metal-to-metal contact.
Corrosion-resistant pipework316 stainless steel pipes, modular manifold blocks, main valve and pressure gauge.
Fork movement, lifting eyesBolt-on base for forklift trucks and pallet trucks, with four lifting eyes for crane lifting.
Deployment on demandMultiple circuits or multiple shut-off valves; the main connection is adapted to the gas supply.

Technical specifications of the PW25 horizontal gas cylinder bundle

Type, part number PW25 (horizontal; variants: PW25x04 … PW25x24)
Operating pressure 200 / 300 / 400 bar
Frame hot-rolled steel section, welded, galvanised; bolted base for forklift trucks and pallet trucks; 4 lifting eyes
Manifold corrosion-resistant steel (316) pipes, modular manifold blocks, main valve and pressure gauge
Certification TPED type-approval (2010/35/EU, ADR/RID) and PED EU type-examination, Module B (2014/68/EU); notified body: NB 1354
Design EN ISO 10961:2019
Bottles 50 litres; every bottle in the batch has the same test pressure
Test print 300 / 450 / 600 bar (depending on the cylinder)
Operating temperature −20 … +65 °C
Usage scenario may only be filled, transported and emptied whilst in a horizontal position
PW25x04 – 4 bottles (2 × 2) 510 × 672 × 1805 mm · 200 l · chassis approx. 175 kg, with full bottles approx. 565 kg
PW25x06 – 6 bottles (2 × 3) 510 × 906 × 1805 mm · 300 l · chassis approx. 200 kg, with full bottles approx. 785 kg
PW25x08 – 8 bottles (2 × 4) 510 × 1140 × 1805 mm · 400 l · chassis approx. 220 kg, with full bottles approx. 1000 kg
PW25x09 – 9 bottles (3 × 3) 745 × 906 × 1805 mm · 450 l · chassis approx. 235 kg, with full bottles approx. 1113 kg
PW25x10 – 10 bottles (2 × 5) 510 × 1374 × 1805 mm · 500 l · chassis approx. 250 kg, with full bottles approx. 1225 kg
PW25x12 – 12 bottles (4 × 3) 975 × 906 × 1805 mm · 600 l · chassis approx. 280 kg, approx. 1,450 kg with full bottles
PW25x15 – 15 bottles (3 × 5) 745 × 1374 × 1805 mm · 750 l · chassis approx. 300 kg, with full bottles approx. 1763 kg
PW25x16 – 16 bottles (4 × 4) 975 × 1140 × 1805 mm · 800 l · chassis approx. 310 kg, with full bottles approx. 1870 kg
PW25x20 – 20 bottles (4 × 5) 975 × 1374 × 1805 mm · 1000 l · chassis approx. 350 kg, with full bottles approx. 2300 kg
PW25x24 – 24 bottles (6 × 4) 1445 × 1140 × 1805 mm · 1200 l · chassis approx. 400 kg, with full bottles approx. 2740 kg
Drawings of the PW25 horizontal gas cylinder rack without dimensions: top view, side view and end view
Views of the PW25; dimensions vary by version, as shown in the table

Construction and materials

The PW25 is the horizontal version of the second-generation PW23 range: it is constructed from the same modular components, but the cylinders lie horizontally. The cylinders can be filled, transported and emptied without being removed from the bundle; the bundle can only be filled, transported and emptied whilst in a horizontal position.

The frame is a galvanised structure welded from hot-rolled steel sections. The cylinders are secured by side and top supports, as well as a clamping plate tightened with threaded studs; rubber pads are fitted between the plate and the cylinders. The cylinders are connected to the modular manifold blocks via corrosion-resistant pipes of uniform length and Ø8 mm; from there, a Ø16 mm pipe leads to the valve block, the main valve and the pressure gauge. The pipework can be removed from one side. A bolted base at the bottom facilitates forklift handling, whilst four lifting eyes are provided for crane lifting.

PW25 horizontal gas cylinder rack, viewed from the front, without a background: nine cylinders lie in three rows within the galvanised steel frame
Front view: the bottles are arranged in three rows

Gases and their applications

The bundle is designed for permanent and liquefied industrial gases — such as nitrogen, argon, helium, oxygen, carbon dioxide and compressed air — in accordance with the relevant authorisations for the cylinders and valves; it must not be used for acetylene. For toxic gases, the total capacity of the bundle must not exceed 1,000 litres. Who we recommend it for:

  • Gas producers and distributors
  • Compressor manufacturers
  • Gas system installers
  • Gas production systems
  • Industrial plants
  • Professional divers

Standards and licences

  • Transport under pressure: on transportable pressure equipment Directive 2010/35/EU (TPED), and in accordance with ADR/RID (Directive 2008/68/EC); type-approval: 15516/5/2025 (Technická inšpekcia, a.s., designated organisation: 1354).
  • Stationary storage: on pressure equipment Directive 2014/68/EU (PED) in accordance with: EU type-examination (Module B): 15512/5/2025.
  • Planning EN ISO 10961:2019 (design, manufacture and testing of gas cylinder bundles).

We provide user guides in Hungarian and English with the bundles. Technical background: gas safety standards and regulations.

Available options

Number of bottles4, 6, 8, 9, 10, 12, 15, 16, 20 or 24 bottles, each with a capacity of 50 litres.
BottlesNew cylinders from manufacturers within or outside the EU, or your own reconditioned cylinders: we will carry out the inspection.
Operating pressure200, 300 or 400 bar (test pressure 300, 450 or 600 bar).
CertificationTPED for transport, PED for stationary storage.
TerminationDIN 477-1, ISO 5145, BS, CGA or other national standards.
Circles and valvesMore circuits or more shut-off valves, using the existing modular components.
PublicationBottle colouring, a bespoke label featuring the customer’s name and logo.

Request a quote for the PW25 horizontal gas cylinder bundle

Please specify how many cylinder-based units you require (4–24), the type of gas, the operating pressure and the outlet standard, the number of connections or shut-off valves, whether TPED or PED certification is required, and whether you require new cylinders or your own. If you do not know any of these details, please write „I don’t know”, and our technical team will help you choose.

I would like to request a quote →

Related pages

Related products

A reliable choice

3D design of an automatic gas cylinder handling system
Based on a custom quote

Bespoke labelling and engraving, stamping machine design and manufacture. Whether you have a special bottle size or a special product, we can meet your needs.

Offshore gas cylinder bundle: PWENT’s second-generation PW23x16 bundle for use offshore — offshore and onshore versions available on request
Based on a custom quote

Gas cylinder bundles for use on board ships, on offshore platforms and in ports, based on the second-generation PW23 bundle range: hot-dip galvanised steel frame, stainless steel manifold, 4–24 × 50 l.

Customised design: we tailor the mounting, surface protection and certification (DNV 2.7-1 if required) to the specific application — please ask for a quote.