Horizontal gas cylinder bundle comprising 4, 6, 8, 9, 10, 12, 15, 16, 20 or 24 50-litre cylinders, for a maximum working pressure of 400 bar. Length 1805 mm, width 510–1445 mm, height 672–1374 mm.
TPED (2010/35/EU) type-approval and ADR/RID, and PED (2014/68/EU) EU type-examination; design: EN ISO 10961:2019.
Durable structural design and standard solutions for safe operation.
Tailored to individual technical requirements, gas types and operating conditions.
A PW25 horizontal gas cylinder bundle (bündel) The horizontal version of the second-generation PW23 range: it holds 4–24 50-litre cylinders in a single unit that can be moved using a forklift or a crane, with a maximum operating pressure of 400 bar. The cylinders lie horizontally, so the bundle is low-profile and can fit where a vertical bundle cannot. In principle, any member of the PW23 family can be ordered in a horizontal configuration; the table below lists the certified versions.
| Type, part number | PW25 (horizontal; variants: PW25x04 … PW25x24) |
|---|---|
| Operating pressure | 200 / 300 / 400 bar |
| Frame | hot-rolled steel section, welded, galvanised; bolted base for forklift trucks and pallet trucks; 4 lifting eyes |
| Manifold | corrosion-resistant steel (316) pipes, modular manifold blocks, main valve and pressure gauge |
| Certification | TPED type-approval (2010/35/EU, ADR/RID) and PED EU type-examination, Module B (2014/68/EU); notified body: NB 1354 |
| Design | EN ISO 10961:2019 |
| Bottles | 50 litres; every bottle in the batch has the same test pressure |
| Test print | 300 / 450 / 600 bar (depending on the cylinder) |
| Operating temperature | −20 … +65 °C |
| Usage scenario | may only be filled, transported and emptied whilst in a horizontal position |
| PW25x04 – 4 bottles (2 × 2) | 510 × 672 × 1805 mm · 200 l · chassis approx. 175 kg, with full bottles approx. 565 kg |
| PW25x06 – 6 bottles (2 × 3) | 510 × 906 × 1805 mm · 300 l · chassis approx. 200 kg, with full bottles approx. 785 kg |
| PW25x08 – 8 bottles (2 × 4) | 510 × 1140 × 1805 mm · 400 l · chassis approx. 220 kg, with full bottles approx. 1000 kg |
| PW25x09 – 9 bottles (3 × 3) | 745 × 906 × 1805 mm · 450 l · chassis approx. 235 kg, with full bottles approx. 1113 kg |
| PW25x10 – 10 bottles (2 × 5) | 510 × 1374 × 1805 mm · 500 l · chassis approx. 250 kg, with full bottles approx. 1225 kg |
| PW25x12 – 12 bottles (4 × 3) | 975 × 906 × 1805 mm · 600 l · chassis approx. 280 kg, approx. 1,450 kg with full bottles |
| PW25x15 – 15 bottles (3 × 5) | 745 × 1374 × 1805 mm · 750 l · chassis approx. 300 kg, with full bottles approx. 1763 kg |
| PW25x16 – 16 bottles (4 × 4) | 975 × 1140 × 1805 mm · 800 l · chassis approx. 310 kg, with full bottles approx. 1870 kg |
| PW25x20 – 20 bottles (4 × 5) | 975 × 1374 × 1805 mm · 1000 l · chassis approx. 350 kg, with full bottles approx. 2300 kg |
| PW25x24 – 24 bottles (6 × 4) | 1445 × 1140 × 1805 mm · 1200 l · chassis approx. 400 kg, with full bottles approx. 2740 kg |

The PW25 is the horizontal version of the second-generation PW23 range: it is constructed from the same modular components, but the cylinders lie horizontally. The cylinders can be filled, transported and emptied without being removed from the bundle; the bundle can only be filled, transported and emptied whilst in a horizontal position.
The frame is a galvanised structure welded from hot-rolled steel sections. The cylinders are secured by side and top supports, as well as a clamping plate tightened with threaded studs; rubber pads are fitted between the plate and the cylinders. The cylinders are connected to the modular manifold blocks via corrosion-resistant pipes of uniform length and Ø8 mm; from there, a Ø16 mm pipe leads to the valve block, the main valve and the pressure gauge. The pipework can be removed from one side. A bolted base at the bottom facilitates forklift handling, whilst four lifting eyes are provided for crane lifting.

The bundle is designed for permanent and liquefied industrial gases — such as nitrogen, argon, helium, oxygen, carbon dioxide and compressed air — in accordance with the relevant authorisations for the cylinders and valves; it must not be used for acetylene. For toxic gases, the total capacity of the bundle must not exceed 1,000 litres. Who we recommend it for:
We provide user guides in Hungarian and English with the bundles. Technical background: gas safety standards and regulations.
Please specify how many cylinder-based units you require (4–24), the type of gas, the operating pressure and the outlet standard, the number of connections or shut-off valves, whether TPED or PED certification is required, and whether you require new cylinders or your own. If you do not know any of these details, please write „I don’t know”, and our technical team will help you choose.
Bespoke labelling and engraving, stamping machine design and manufacture. Whether you have a special bottle size or a special product, we can meet your needs.
Gas cylinder bundles for use on board ships, on offshore platforms and in ports, based on the second-generation PW23 bundle range: hot-dip galvanised steel frame, stainless steel manifold, 4–24 × 50 l.
Customised design: we tailor the mounting, surface protection and certification (DNV 2.7-1 if required) to the specific application — please ask for a quote.
We always use the cookies necessary for the website to function. We only load statistical tracking tools (Google Analytics, Jetpack) and external content (such as Google Maps) with your consent. You can change your settings at any time by clicking the „Cookie settings” button.