PW23x24 gas cylinder bundle, 24 × 50 l

Our areas of expertise

PW23x24 gas cylinder bundle, 24 × 50 l

24 x 50-litre cylinders (Ø 229 mm), maximum working pressure 400 bar. Dimensions: 1040 × 1445 × 1805 mm. TPED (2010/35/EU) and ADR/RID, or PED (2014/68/EU); design: EN ISO 10961.

A 24-cylinder model from PWENT’s second-generation PW23 cylinder family: robot-welded, galvanised steel frame, stainless steel manifold. We can configure it to your requirements for gas type, pressure and outlet – please ask for a quote!

SKU PW23x24 Category

Industrial reliability

Durable structural design and standard solutions for safe operation.

Customisable design

Tailored to individual technical requirements, gas types and operating conditions.

Description

Learn more about the product

A PW23x24 gas cylinder bundle It combines 24 x 50-litre cylinders, each with a diameter of 229 mm, into a single unit that can be handled by both a crane and a forklift truck, with a maximum operating pressure of 400 bar. This is the 24-cylinder model from PWENT’s second-generation PW23 range. The largest member of the range: 24 cylinders and a water-holding capacity of 1,200 litres in a single unit, suitable for applications such as hydrogen refuelling stations or high-gas-consumption facilities where the gas supply must rarely be interrupted. A single connection provides access to 1,200 litres of gas capacity, and the bundle can be replaced in a single step.

Robot-welded, galvanised steel frameConsistent welding quality; the galvanised finish protects the frame from corrosion.
Minimal metal-to-metal contactSpacers between the bottles and the frame reduce contact, thereby minimising corrosion of the bottle’s surface.
Stainless steel collection pipe9 mm flow-through valves for a higher gas flow rate.
Low-profile design, easy to moveConcealed lifting eyes, forklift pockets, height 1,805 mm.
Deployment on demandThe number of main valves and sections can be tailored to requirements, with up to 4 sections.
Laser-engraved nameplateFeaturing the client’s name and logo.

Technical specifications of the PW23x24 gas cylinder bundle

Type, part number PW23x24
Bottles 24 × 50 l, Ø 229 mm
Water storage capacity 1,200 l
Operating pressure 200 / 300 / 350 / 400 bar
Overall dimensions (w × l × h) 1040 × 1445 × 1805 mm (±10 mm)
Mass approx. 1,489 kg with empty cylinders, excluding gas (based on a 45 kg cylinder; may vary depending on the cylinder)
Frame robot-welded, galvanised steel
Manifold stainless steel, 9 mm flow-through valves
Certification TPED (2010/35/EU) and ADR/RID for transport, or PED (2014/68/EU) for stationary storage
Design EN ISO 10961
Termination DIN 477-1, ISO 5145, BS, CGA or other national standards

Construction and materials

When designing the second generation, we had three objectives: a higher gas flow rate (9 mm bore in the valve), higher pressure (maximum operating pressure of 400 bar) and a lower overall height (1805 mm). The structure is now lighter, incorporates more standardised components, and provides easier access to parts during both manufacture and maintenance. This will result in a more durable unit, as well as lower capital and maintenance costs.

The frame is made of robot-welded, galvanised steel. The concealed lifting eyes ensure the bundle remains low, whilst the forklift pockets facilitate handling. Spacers between the cylinders and the frame minimise metal-to-metal contact. The manifold is made of stainless steel, with 9 mm flow valves; the number of main valves and sections can be customised as required. It is supplied as a ready-to-ship unit: the bundles are secured on a lorry and can be transported in accordance with ADR/RID regulations.

Stainless steel manifold and valve block with pressure gauge on the PW23 gas cylinder bundle
Stainless steel manifold, 9 mm flow-through valves

Gases and their applications

The bundle is designed for both permanent and liquefied gases: in addition to the standard nitrogen, argon and helium supplies, it is also suitable for special gases, such as hydrogen or oxygen bundles. The outlet and valves are tailored to the gas, whilst the pressure is determined by the application. Who we recommend it for:

  • Gas producers and distributors
  • Compressor manufacturers
  • Gas system installers
  • Gas production systems
  • Hydrogen refuelling stations
  • Biogas plants
  • CNG filling stations
  • Professional divers

Standards and licences

  • Transport under pressure: on transportable pressure equipment Directive 2010/35/EU (TPED), and in accordance with ADR/RID (Directive 2008/68/EC).
  • Stationary storage: on pressure equipment Directive 2014/68/EU (PED) according to.
  • Planning EN ISO 10961 (design, manufacture and testing of gas cylinder bundles).

We provide user guides in Hungarian and English with the bundles. Technical background: gas safety standards and regulations.

Available options

BottlesNew cylinders from manufacturers within or outside the EU, or your own reconditioned cylinders: we will carry out the inspection.
Operating pressure200, 300, 350 or 400 bar.
CertificationTPED for transport, PED for stationary storage.
TerminationDIN 477-1, ISO 5145, BS, CGA or other national standards.
Main valves and sectionsAs required; up to 4 per section, 1 of each in the standard configuration.
AccessoriesSafety relief valve, pressure reducer, dip tube.
PublicationBottle colouring, a bespoke label featuring the customer’s name and logo.

Request a quote for the PW23x24 gas cylinder bundle

Please specify the type of gas, the operating pressure and the outlet standard required, the number of main valves and sections, whether TPED or PED certification is required, and whether you require new cylinders or your own. If you are unsure about any of these details, please write „I don’t know”, and our technical team will help you choose.

I would like to request a quote →

Related pages

Related products

A reliable choice

3D design of an automatic gas cylinder handling system
Based on a custom quote

Bespoke labelling and engraving, stamping machine design and manufacture. Whether you have a special bottle size or a special product, we can meet your needs.

A bundle of marine gas cylinders in a protective frame
Based on a custom quote

Vertical gas cylinder bundles for marine use. Special fixing lugs, marine-grade surface treatment, approvals for marine and harbour use. Available in 4, 8, 9, 12, 16, 20, 24, 30 cylinder configurations, with operating pressures of either 200 bar or 300 bar. Robot-welded, hot-dip galvanised steel construction. For a bespoke construction and quantity discount, please call us.